Click image to view full size image
DIPSO Biological Buffer 3-[N,N-Bis(2-hydroxyethyl)amino]-2-hydroxy-1-propanesulfonic acid CAS NO 68399-80-4 99%
Quick detail:
| Name | DIPSO | Appearance | White Powder |
| Assay,% | 99.0101.0 | Water Content,% | ≤3.0 |
| PH(1% aq.) | 4.5-5.1 | Solubility(10% aq.) | Clear, colorless solution |
| Ultraviolet absorbance/260nm(0.1M aq.) | ≤0.030 | Ultraviolet absorbance(0.1M aq.) | ≤0.040 |
Description:
> Formula:C7H17NO6S
> Weight: 243.3
> MP/BP :189-192 °C(lit.)
> Storage: room temperature
> Safety Description:S24/25
> Danger Description:R10-36/37/38
> Danger Symbol: F,Xi
>Shelf life:two years
1. Applications:
A. DIPSO is a Zwitterionic buffer for biochemical studies.
B. DIPSO is used to uric acid, cholesterol colorimetric assay.
2 Location
A. biology/biochemistry laboratory, pharmaceutical factory, cosmetics factory
3. Note:
DIPSO is useful in the pH range of 7.0-8.2. DIPSO can be combine multiple buffers such as HEPES, MOPS and DIPSO and it may be increase the buffering capacity. This buffer combination will allow to expand pH buffering over a range of temperatures while decreasing the individual concentrations of buffers used, thus lowering the chance of toxicity.
Synonyms:
DIPSO;3-(BIS(2-HYDROXYETHYL)AMINO)-2-HYDROXY-1-PROPANESULFonIC ACID;3-[N,N-BIS(2-HYDROXYETHYL)AMINO]-2-HYDROXY-1-PROPANESULFonIC ACID;3-[N,N-BIS(2-HYDROXYETHYL)AMINO]-2-HYDROXYPROPANESULFonIC ACID;3-[N,N-BIS(HYDROXYETHYL)AMINO]-2-HYDROXYPROPANESULFonIC ACID;3-[N,N-BIS(HYDROXYETHYL)AMINO]-2-HYDROXYPROPANE SULPHonIC ACID;8-[N,N-BIS(2-HYDROXYETHYL)AMINO]-2-HYDROXY-PROPANESULFonIC ACID;N,N-BIS(2-HYDROXYETHYL)-3-AMINO-2-HYDROXYPROPANESULFonIC ACID;DIPSO; 3-[bis(2-hydroxyethyl)amino]-2-hydroxypropane-1-sulfonic acid; (2S)-3-[bis(2-hydroxyethyl)ammonio]-2-hydroxypropane-1-sulfonate; (2R)-3-[bis(2-hydroxyethyl)ammonio]-2-hydroxypropane-1-sulfonate
Related categories:Pharmaceutical Intermediates;Biochemistry;Good's Buffers;buffer
Related Products:10191-18-1;102783-62-0
Determination of melting point
Instrument:
Micro melting point apparatus WRS-2A, Melting point tubes
Determination of step:
Open switch, stable 20min.
First set the starting temperature than the melting point of the low 10 , heating rate 2 / min.
The sample was grind as fine as possible and load in a clean, dry melting point pipe ,until the sample was compressed into about 1cm high .When the actual temperature reaches the set temperature and stabilized . Inserted into the capillary with the sample, the simultaneous determination of three.
The determination of PH
Weigh a certain amount of samples into test tube, add a certain amount of water, shake and dissolve, determination of the pH used have been calibrated
DIPSO 3-[N,N-Bis(2-hydroxyethyl)amino]-2-hydroxy-1-propanesulfonic acid CAS NO 68399-80-4
